2. Installation
14
PNEG-2348
IR Hopper Sensor Installation
Wiring the IR Hopper Sensor
Wire the included 10' sensor cable (13) with quick connect into the i-Plus3 control box.
1. Cut the cable to length as needed and connect the loose end to screw terminals inside the
control box.
2. Route the sensor cable (13) down the drop tube and fasten using cable ties.
3. Connect the cable to the IR hopper sensor (19) using the 4-pin quick connect.
Figure 2F
Wiring the IR Hopper Sensor
Ref #
Description
13
10' Sensor Cable (C2000827)
18
Hopper
19
Sensor
