manualshive.com logo in svg

Culligan HE Twin Water Softener, Owner'S Manual

Share
Download
Culligan HE Twin Water Softener Owner'S Manual Download Page 5

1

01023052

Thank You

Welcome To Your New World of Better Living with Culligan Water.

The Culligan HE Twin Water Softeners with Soft-Minder

®

 Meter and Aqua-Sensor

®

 sensing 

device are tested and certfied by the Water Quality Association (WQA) against NSF/ANSI 

Standard 372, CSA B483.1, and NSF/ANSI Standard 44 for the effective reduction of hardness 

(calcium and magnesium), barium, and radium 226/228, as verified and substantiated by 

test data.

For installations in Massachusetts, Massachusetts Plumbing Code 248 CMR shall be adhered 

to. Consult your licensed plumber for installation of this system. This system and its installa-

tion must comply with state and local regulations. The use of saddle valves is not permitted.

The Culligan HE 1” Twin water softener requires the use of a Culligan connector, PN 01023290 (plastic) 

or PN 01021077 (copper).

The Culligan HE 1” Twin NC model has not been tested or certified by WQA and does not include the 

Culligan connector.

The Culligan HE Twin water softener outdoor controller enclosure complies with the UL 50/50E and UL 

746C standards for a NEMA 3R Enclosure Rating.

If this is your first experience having soft, conditioned water in your home, you’ll be amazed at the marvel-

ous difference it makes. We promise that you’ll never want to be without it again. 

Congratulations, too, on selecting one of the “first family” of water conditioners in the prestigious Culligan 

High Efficiency Water Softeners. With Culligan’s many years of knowledge and experience in water treat-

ment, you can be confident that the model you selected has been designed and engineered to provide 

years of service with a minimum of care and attention.

Some localities have corrosive water. A water softener cannot correct this problem and so its printed 

warranty disclaims liability for corrosion of plumbing lines, fixtures or appliances. If you suspect corrosion, 

your Culligan Dealer has equipment to control the problem.

NOTICE 

Sodium Information: Water softeners using sodium chloride for regenera-

tion add sodium to the water. Persons who are on sodium restricted diets 

should consider the added sodium as part of their overall sodium intake.

Serial Numbers

The control valve serial number is located on the back of the timer case.

The media tank serial number is located on the top surface of the tank.

NOTE 

DO NOT remove  or destroy the serial number.  It must be referenced on 

request for warranty repair or replacement.

Summary of Contents for HE Twin Water Softener





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands