Culligan Aquasential Select Plus 10 Iron-OX5, Owner'S Manual

Page: 7 / 17

Specifications
7
01040684 A 06/21
Culligan Aquasential Select Plus Iron-OX5 & Sulfur-OX3 Filters
10ʺ Iron-OX5 10ʺ Sulfur-OX3
Control Valve 1" reinforced thermoplastic 1" reinforced thermoplastic
Overall Conditioner Height 67" 67"
Media Tank Dimensions (D x H) 10" x 54" tank 10" x 54" tank
Filter Media Type 1�0 cu� ft� Birm 1�0 cu� ft� Cullar S
Underbedding
G-50
35 lb —
Cullsan U 25 lb —
Cullsan — 20 lb
Capacity¹ 500 gallons 500 gallons
Freeboard² 21" 29"
Max� Clear Water (Soluble) Iron 5 ppm —
Rated Hydrogen Sulfide — 1 ppm
Max. Hydrogen Sulfide⁵ — 3 ppm
Minimum Alkalinity 100 ppm 100 ppm
pH for Iron Removal³ 7�0 - 8�5 —
pH for Hydrogen Sulfide Removal⁶ — 7�0 - 8�5
Service Flow @ Pressure Drop (Clean Bed)
Normal 4 gpm @ 5 psi 4 gpm @ 2�9 psi
Maximum⁴ 6 gpm @ 9 psi 6 gpm @ 9 psi
Operating Pressure 20-60 psi 20-60 psi
Operating Temperature 33-120° F (1-48° C) 33-120° F (1-48° C)
Electrical Requirements 24V/60Hz 24V/60Hz
Power Consumption, Continuous/Maximum 3 Watts/10 Watts 3 Watts/10 Watts
Drain Flow 5�5 gpm 5�5 gpm
Reconditioning Time
Backwash
15 minutes 15 minutes
Air Draw 40 minutes 40 minutes
Fast Rinse 5 minutes 5 minutes
¹ Capacity based on 4 gpm and 5 mg/L of dissolved iron�
² Measure from top of media bed to top of inlet fitting�
³ Not recommended for Hydrogen Sulfide removal�
⁴ Max flow rates and pressure drop characteristics have not been validated by the Water Quality Association. The maximum
specified flow rate at which the system will deliver treated water, as validated by the Water Quality Association, is defined as
service flow�
⁵ Not validated by Water Quality Association.
⁶ Not recommended for iron removal.