background image

Menu Navigation

Advance timer 

through display options

Initiate a regeneration

Decrease 

the setting

Increase 

the setting

The programming menu for the Select Plus is outlined in the following table:

Table 1�  Setting Time of Day

Setting

Display

Range Limits

Default

Time of Day

12:00 AM - 11:59 PM (12 hr)

00:00 - 23:59 (24 hr)

12:00 PM 

12:00

*Time of 

Reconditioning

12:00 AM - 11:30 PM (12 hr)

00:00 - 23:30 (24 hr)

2:00 AM

02:00

Reconditioning

There are several conditions that will cause the control to initiate a reconditioning cycle� The “REG” annunciator will light 

when the control has signaled for a reconditioning� The “REG” annunciator will flash while the control is in reconditioning� 
The following are conditions that will call for reconditioning:

1�  When the flow meter has recorded the passage of a predetermined number of gallons�
2�  At the preset time, when the number of days without a reconditioning is equal to the Timeclock Backup setting�
3�  At the preset time, when the “REGEN” button is depressed once� “REG” will light�
4�  Immediately, when the “REGEN” button is depressed for three seconds� “REG” will light and blink�
5�  Immediately, if power to the unit has been off for more than 3 hours and time of day has been restored�

10

 01040684  A  06/21

Summary of Contents for Aquasential Select Plus 10 Iron-OX5


















Reviews: