9
5. Place mug on the drip tray.
6. Press the 10 oz. (295 ml) cup button. Light
will start flashing and the hot water will
start to dispense momentarily.
7. The one-time cleaning process is complete.
Discard hot water. Your brewer is ready to
use.
Charcoal Water Filter
Your brewer comes with a charcoal water filter
that eliminates chlorine, bad tastes and odors
from tap water.
Inserting the Water Filter
1. Remove the filter and filter holder from the
polybag.
2. Soak the filter, fully immersed in cold tap
water, for 15 minutes.
3. Place the charcoal water filter in the holder
and snap the holder cover closed. Be
careful – improper placement can tear the
filter skin (see figure below).
4. Flush the filter and holder by running fresh
water through the hole in the bottom of
the compartment for
10 seconds.
5. Allow the filter to drain completely.
6. Place the assembled water filter holder
into the water reservoir, pushing it down to
fit into place.
Note:
We recommend changing the
water filter every 60 days or after 60 uses, and
more often if you have hard water.
Replacement filters can be purchased in
stores, or by calling Cuisinart Consumer
Service, or at www.cuisinart.ca
