8
OPERATING INSTRUCTIONS
Sit Griddler & Deep Pan on a clean, flat surface
indoors where you intend to cook. When you
are ready to begin cooking make sure the drip
tray and desired plate surfaces are fitted. Plug
your Griddler into an electrical outlet and press
the ON/OFF ( ) button. The LCD will show
the start-up screen (as per left image below).
SELECT COOKING FUNCTION
:
There are two cooking functions. GRILL and
DEEP PAN. Depending on which plates you
have inserted into the bottom of the unit, the
Griddler will automatically detect which
function to cook and indicate on the LCD
screen (see images below).
Note:
The Griddler has a preset temperature of
200ºC for both GRILL and DEEP PAN Modes.
SETTING THE TEMPERATURE FOR
GRILL OR GRIDDLE / SANDWICH
PRESS / OPEN BBQ MODE
To set temperatures for Grill, Griddle, Sandwich
Press or Open BBQ mode, the unit will detect
the GRILL function automatically and be
preset to 200°C. To change the temperature,
rotate the PRESS to SELECT dial to the left
(decrease temperature) or the right (increase
temperature). This will allow you to scroll
through temperatures - 80°C, 120°C, 160°C,
180°C, 200°C & 230°C. Press the PRESS to
SELECT dial for desired temperature - when
reached the temperature will no longer flash.
“+” Temperature Increase
“-” Temperature Decrease
The Griddler will then begin to PREHEAT. This
will appear on the LCD screen as well as the
preheat status bar which shows the heating
progression. When 5 bars are illuminated, the
grill is at the correct temperature and the unit
will BEEP.
GRILL will turn from red to green on the
display and you will now have the option to set
a timer when “00:00” appears in the screen.
SETTING THE TIMER
NOTE: the timer is optional and is not
required for the cooking process to occur. If
not selected within 1 minute after preheat,
the timer will revert to --:--.
•
Countdown Timer –
When the 00:00 is
flashing, rotate the PRESS to SELECT dial to
the left (decrease time) or right (increase
time). The time will increase in 30 second
increments. If you wish to increase in 1
minute increments rotate and hold the dial
for more than 3 seconds. Press the PRESS
to SELECT dial to confirm time and begin
countdown.
The unit will beep 3 times every 10 seconds
when the timer has finished counting down.
The timer will then start counting up to show
how much time has elapsed.
NOTE: Once the timer starts counting
upwards, it will beep every 3 seconds until
cooking is stopped. TO DISABLE THE
BEEPS, PRESS AND RELEASE THE PRESS
to SELECT DIAL.
Preheating
Preheating is
almost done
The unit is
preheated Ready
to set timer
