3
IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart Elite
Collection
™
14-Cup (3.5 L) Food Processor and
the accessories for it:
14-, 11- and 4.5-cup (3.5 L, 2.75 L, 1.12 L) work
bowls, work bowl cover, metal chopping/mixing
blade, dough blade, adjustable slicing disc,
reversible shedding disc, stem adapter, large
and small pushers, spatula, storage case,
instruction/recipe book and How-to DVD.
CAUTION:
THE CUTTING TOOLS HAVE VERY SHARP
EDGES. To avoid injury when unpacking the
parts, please follow these instructions.
1. Place the box on a low table or on the floor
next to the kitchen counter where you
intend to keep the food processor. Be sure
the box is right side up.
2. Open top flaps—there will be a rectangular
block of foam that holds the processor
parts, each fitted into a cavity in the foam.
3. Remove the instruction/recipe book, the
spatula (A) is on one side of the foam
block.
4. Remove the bowl cover (B) from the other
side of the foam block. Lift out the large
and small pushers with cover (C) from their
space under the bowl cover in the foam
block.
5. Lift out the DVD from its space in the foam
block.
6. Lift out the foam block and the cardboard
frame.
7. The housing base with 14-, 11- and 4.5-
cup work bowls are on one side of the
bottom of the box.
8. Remove the base and bowls together by
grasping the handle and lifting straight up.
Do not rotate the bowl clockwise on the
base. This will cause the bowl to separate
from the base.
9. Place the food processor on the counter or
table. Read the instructions thoroughly
before using the machine.
10. The storage case is on the other side of
the bottom of the box.
11. Lift out the storage case, unlock the cover
and remove the foam block; small metal
chopping/mixing blade (D), dough blade
(E), large metal chopping/mixing blade (F),
and stem adapter (G), are each in a cavity.
CAREFULLY REMOVE THE METAL
CHOPPING/MIXING BLADE BY
GRASPING THE CENTRE WHITE HUB
AND LIFTING IT STRAIGHT UP. NEVER
TOUCH THE BLADES, AS THEY ARE
RAZOR SHARP.
12. Pull out the drawer to the storage case
with the adjustable slicing disc (H), and
CAREFULLY REMOVE IT BY USING THE
FINGER HOLES. DO NOT TOUCH THE
BLADE, IT IS VERY SHARP.
The
reversible shredding disc (I) is also in the
drawer. Carefully remove the slicing disc
by using the finger holes and carefully
remove the shredding disc by using the
plastic hub. Remember to lock the parts in
the storage case when not in use.
13. Save the shipping cartons and plastic foam
blocks. You will find them very useful if you
need to repack the processor for moving or
other shipment.
Please watch the enclosed How-to DVD
before using the food processor.
Storage Cover
with Lock
Drawer
