19
Technical
1.
Problem:
The motor does not start.
Solution:
• There is a safety interlock to prevent the motor
from starting if it is not properly assembled.
Make sure the work bowl and work bowl cover
are securely locked into position.
•
If the motor still will not start, check the
power cord and outlet.
2.
Problem:
The food processor shuts off during
operation.
Solution:
• The cover may have become unlocked;
check to make sure it is securely in position.
•
A safety protector in the motor prevents the
motor from overheating, which is caused by
excessive strain. Press the Off control button
and wait 10 minutes to allow the food proces-
sor to cool off before resuming.
3.
Problem:
The motor slowed down during
operation.
Solution:
• This is normal as some heavier loads
(e.g., slicing/shredding cheese) may require
the motor to work harder. Simply reposition
the food in the feed tube and try again.
•
The maximum load capacity may have been
exceeded. Remove some of the ingredients
and continue processing.
4.
Problem:
The food processor vibrated/moved
around the countertop during processing.
Solution:
• Make sure the rubber feet at the bottom of
the unit are clean and dry. Also make sure
that the maximum load capacity is not being
exceeded.
•
This is normal as some heavier loads
(e.g., slicing/shredding cheese) may require
the motor to work harder.
