4
ASSEMBLY
After washing all parts, please see below for assembly. Place base on flat surface and
plug in.
BLENDER JAR OPERATION
1.
With the base unit on the tabletop and unit plugged in, place the blender jar
assembled with the blade assembly onto the base and secure into place. The unit
automatically is activated and in Standby mode with the red POWER LED light
illuminated and flashing.
Note:
Blade assemblies are interchangeable based on recipes and desired end
results.
2.
Add food ingredients. Replace the cover. You may add more ingredients by lifting the
measured pour lid and dropping ingredients through the fill area. Replace the pour
lid after adding ingredients.
Do no put hands into jar with blender in Standby mode.
Note:
To remove blender jar cover, lift edge of cover upward. Do not use measured
pour lid to remove cover.
3.
For continuous blending, press the desired speed. The blue LED light will illuminate,
indicating that the blender is on and running. It is possible to switch between High
and Low speeds by simply pushing the desired speed button.
4.
To pause the blending process, press the activated speed button.
The blending process will stop. The red Standby indicator light will continue to flash
to let you know that the blender is still activated.
To reengage a function, choose the desired speed.
5. To pulse, push the Pulse button. The blue Pulse indicator light will flash. Next, push
and release the desired speed button. Repeat as needed. While pulsing, active
indicator lights will be lit. The Pulse function can be used to break apart larger
pieces of food. The Pulse function is also effective for starting the blending process
when you do not want continuous power or processing items that do not require an
extended amount of blending.
6. When you have finished blending, press the activated speed to put unit in Standby
mode. Then remove the blender jar from the base. Pour out ingredients.
NEVER
TOUCH THE BLADE ITSELF
. Unplug the unit.
7. Do not continue to operate the blender over 2 minutes.
QUICK REFERENCE GUIDE
To activate blender
Place vessel fitted with blade
assembly onto base
To begin blending
Press desired speed
To change speeds
Press desired speed
To pulse
In Standby mode press Pulse, then press
and release desired speed button as
needed.
To stop blending
Press activated speed
Blender Jar
Assembly
Travel Cup
Assembly
Chopping
Cup Assembly
1. Turn blender jar
upside down.
2. Place blade assembly
(a) on the round
opening of the jar
and turn clockwise
until tightened.
3. Stand jar upright,
place cover with
pour lid in place on
blender jar.
4. Place on blender
base.
1. Place cup on flat
surface.
2. Attach blade
assembly (a) on
round opening of
the cup and turn
clockwise until
tightened.
3. Place on blender
base.
1. Place cup on flat
surface.
2. Attach blade
assembly (b) on
round opening of
the cup and turn
clockwise until
tightened.
3. Place on blender
base.
