6
7
1.
On/Off Button
Use to turn your Coffeemaker on and off.
Works in tandem with the Function knob.
2. Clock Display
Displays time of day, Auto On, and Auto Off
times.
3.
Hour and Minute Buttons
Use to set hours and minutes for time
of day, Auto On, and Auto Off times.
4.
1-4 Cup Setting with Indicator
Improves extraction, flavour and temperature
when brewing fewer than 5 cups.
5.
Clean Function
Indicates time to clean coffeemaker
to remove calcium buildup.
6.
Carafe Temperature Knob
Set the heater plate to Low (L), Medium (M),
or High (H) to keep coffee in the carafe at
the temperature you prefer.
7.
Function Knob
a.
PROG
Select to program Auto On time.
Coffeemaker can be programmed to
automatically start brewing up to 24
hours in advance.
b.
AUTO ON
Select to automatically start brewing
coffee at the time you’ve programmed.
c.
AUTO OFF
Select to program your coffeemaker to
automatically shut off up to 4 hours after
brewing.
d.
BREW
Select to begin brew cycle when On
button is pressed.
e.
CLOCK
Select to program time of day.
GETTING TO KNOW YOUR CONTROL PANEL
Detailed programming and use instructions are on pages 7 and 8.
ENjOY THE 2-IN-1 COFFEE PLUS
™
Your Coffee PLUS
™
system is designed to
let you use the Coffeemaker and Hot Water
System separately, or at the same time.
Perfect for every occasion.
PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the coffeemaker is plugged in,
12:00 will appear.
Turn the Function Knob to CLOCK
Hold down the Hour or Minute button until the
clock begins flashing. Press either button to
select the desired time. Hold buttons down to
scroll through the digits, or press and release to
advance one digit at a time. When scrolling, the
numbers will advance slowly and then speed
up. When the number displayed approaches
the desired time, press and release to advance
one digit at a time. Be sure the PM indicator is
on if a PM time is desired.
To finish setting the clock, turn the Function
knob to any other setting or simply wait until
the numbers stop blinking.
SETTING THE AUTO ON TIME
When you turn the Function knob to PROG,
it displays a previously selected Auto On time,
or the default time (12:00pm).
1. Turn the Function knob to PROG
Use the Hour and Minute buttons as above,
to program your start-brew time.
2. Turn the Function knob to AUTO ON
LCD will display the current time.
3. Press and release ON/OFF button
A blue light indicates that the coffeemaker is
in AUTO ON mode. The blue light around On/
Off will come on when brew cycle begins.
Both lights will turn off when the Keep Warm
cycle ends.
NOTE:
To start brew time at the same time
the next day, simply make sure the Function
Knob is on AUTO ON and press and release
On/Off button once more. The blue AUTO ON
light will turn on.
SETTING THE AUTO OFF TIME
Turn the Function Knob to AUTO OFF
Use the Hour and Minute buttons as above to
program your coffeemaker to shut off from 0 to
4 hours after brew cycle is finished.
BEFORE FIRST USE
We recommend flushing out both the
Coffeemaker and Hot Water system before
first use.
Coffeemaker:
Fill the reservoir with cold
water and follow the directions for Brewing
Coffee.
DO NOT ADD COFFEE!
Hot Water System:
Fill the reservoir to the
Max fill line and follow directions for using the
Hot Water System.
Once the system flush is complete, your
Coffee PLUS
™
system is ready to brew and
heat water so you can enjoy Cuisinart at
its best!
CHARCOAL WATER FILTER
Your coffeemaker comes with a charcoal water
filter that eliminates chlorine, bad tastes and
odours from tap water.
Inserting the Water Filter
• Remove the filter from polybag and soak it,
fully immersed, in cold tap water for 15
minutes.
• Lift the water filter holder out of the water
reservoir (see diagram, page 5).
• Press down on the filter compartment and pull
toward you to open.
• Place filter into the holder and snap
it closed. Be careful – improper placement can
tear the filter skin.
• Flush filter by running cold tap water through
holes in bottom of compartment for 10
seconds.
• Allow the filter to drain completely.
• Slide the water filter holder back into the
channel in the water reservoir, pushing it
down to the base of the unit.
NOTE: We recommend changing the
water filter every 60 days or after 60
uses, and more often if you have
hard water.
Replacement filters can be
purchased in stores or by calling
Cuisinart Customer Service.
Coffeemaker
CONTROLS
HoT WaTer sysTem
CONTROLS
8.
On/Off Button
Use to turn your Hot Water System on and off.
9.
Water Ready Indicator
Indicates when water is heated.
10.
Add Water Indicator
Indicates when water should be added.
11.
Safety Feature
(Shown in the locked position)
1
6
7
2
5
3
9
8
10
4
11
