16
FOR YOUR SAFETY
• Like all powerful electrical appliances, a food
processor should be handled with care. Follow
these guidelines to protect yourself and your
family from misuse that could cause injury.
• Handle and store metal blade and discs carefully.
Their cutting edges are very sharp.
• Never put blade or discs on the motor shaft until
the work bowl is locked in place.
• Always be sure that the blade or disc is down on
motor shaft as far as it will go.
• Always insert the metal blade in the work bowl
before putting ingredients in bowl.
• When slicing or shredding food, always use the
pusher. Never put your fingers or spatula into
feed tube.
• Always wait for the blade or disc to stop spinning
before you remove the pusher assembly or cover
from the work bowl.
• Always unplug the unit before removing food,
cleaning, or putting on or taking off parts.
• Always remove work bowl from base of machine
before you remove the chopping/mixing/dough
blade.
• Be careful to prevent the chopping blade from
falling out of the work bowl when emptying the
bowl. Remove it before tilting the work bowl.
FOR BLENDER ATTACHMENT
• The blender is made of corrosion-resistant parts
that are easy to clean. Before first use and after
every use, clean each part thoroughly. Periodical-
ly check all parts before reassembly. If any part
is damaged or blender jar is chipped or cracked,
DO NOT USE BLENDER.
• Remove the blender jar from the motor base by
turning slightly counterclockwise and lifting off.
• Remove the blade assembly by turning coun-
terclockwise. Wash in warm, soapy water, rinse,
and dry thoroughly.
CAUTION:
Handle the blade assembly carefully.
It is SHARP and may cause injury. Do not at-
tempt to remove blades from assembly.
• Remove the blender jar cover and the measured
pour lid insert. Wash in warm, soapy water, rinse
and dry thoroughly, or place in upper rack of
dishwasher. The blender jar must be washed
in warm, soapy water and rinsed and dried
thoroughly. The blender jar can also be placed
upside down in dishwasher.
TIP:
You may wish to clean your blender blade
assembly as follows: Squirt a small amount of
dishwashing liquid into assembled blender jar and
fill halfway with warm water. Run on Low for 15
seconds. Repeat, using clean tap water. Rinse and
dry all parts thoroughly.
MAINTENANCE:
Any other servicing should be
performed by an authorized service representative.
FOR JUICE EXTRACTOR
ATTACHMENT
• For preliminary cleanup, use cleaning brush to
remove excess pulp from the filter/sieve and the
lid after each use. Vegetable and fruit pulp will
harden if left to dry on the unit parts, making it
harder to clean.
• Unplug juicer and carefully take it apart, following
Disassembly Instructions on page 13.
WARNING:
Be careful when handling the mesh
filter basket/blade, as blades are very sharp.
• Rinse all removable parts with cold water.
• Wash the clear juice bowl, pusher, lid and mesh
filter basket/blade in hot, sudsy water, or on top
rack of dishwasher. Do not use a metal brush or
pad. Do not put the juice extractor base in the
dishwasher.
NOTE:
For best juicing results, the mesh filter
basket/blade must always be thoroughly cleaned
after each use.
• Towel- or air-dry all parts.
MAINTENANCE:
Any other servicing should be
performed by an authorized service representative.
