How To Replace the Filters
23
w
w
w
.c
u
ck
o
o
.c
o
m
.m
y
In order to replace the filter, first separate the connecting tube at
the upper part from the Fitting.
▶
Please make sure to use a proper tool (Fitting Separator) when removing the connecting tube from the
fittings. If the Fitting or the connecting tube is damaged, it may leak.
6
Connect the inlet of replaced filter to the faucet of previous filter, and
connect a separate tube to the faucet of new filter. After that, open
the water supply valve and make it flow in the following manner:
▶
Especially for the Sediment Filter, allow water to pass through for about 5minutes.
▶
Connect the Pre-Carbon Block 2.0 Filter to previous filter, and allow water to pass through for about 7
minutes.
▶
Connect the Narural 2.0 Filter to previous filters, and allow water to pass through for about 7 minutes.
▶
Connect the Nano Positive Filter to previous filters, and allow water to pass through for about 10
minutes.
▶
Make sure for water being passed through for more than the recommended time to ensure the desired
water quality.
▶
Then supply filters with water, and check for any water leaks by using a dry cloth.
7
Fitting Separator
연결호스
Open
Open
Inlet
Outlet
