How to Use and Set Functions
17
w
w
w
.c
u
ck
o
o
.c
o
m
.m
y
10
How to adjusting brightness.
▶
On Stanby mode, touch the [ROOM] button for 7 seconds to enter the brightness settings.
▶
Press the [ROOM] button to set the brightness level
※
Level 1: It becomes darker than level 2.
※
Level 2: It is usually brightness . (Default)
※
Level 3: It becomes brighter than level 2
▶
Press the [DISPENSE] button to save the setting.
※
The setting is canceled automatically if it’s left idle for 10 seconds or it is canceled
if the power is turned off.
<Level 1>
<Level 2>
<Level 3>
Use the External Faucet by uplifting the lever
of the External Valve attached to the sink.
▶
In case that the External Faucet is not in use for a long time while
plugged in, the operation of the Heater and the Compressor heats
up the inside, leading to warm the water in the External Valve.
※
If you rub the external valve with a brush or sponge, it may amage
the plating of the valve's outer surface and may cause the mineral
scale to the inside of the external valve.
1
If you have not used the External Faucet for more than a day, it can be polluted.
When reusing it, it will start dispensing after draining remaining water for about one to
two minutes.
How to Use External Faucet (Optional)
Open
Closed
