Cuchen BT10 Series, User Manual

Page: 25 / 64

25
Key Backlight
※
This feature enables the key backlight to turn off when the rice cooker does not need to be used.
※
If you press a button when the backlight is turned off, the backlight of every key will turn on again.
In this case, the pressed button will be disabled.
※
The backlight of only the buttons used in Preset and ENERGY KEEP WARM modes turns on and guides you through the buttons.
※
In about 3 seconds after Cook, Preset, Keep Warm, ENERGY KEEP WARM, Warm/Reheat, or AUTO CLEAN mode starts,
the key backlight will display the current operation status.
※ If the STEAM or SLOW menu is selected in standby, the backlight of the HOUR and MIN buttons will blink and guide you
through the buttons to be used as a guidance message sounds.
Warming Temperature Setting
Blink
Blink
Blink
Blink
Blink Blink
Usual
Cooking
Preset Mode in Progress
ENERGY KEEP WARM in Progress
Time Setting/Language and Volume Control Setting
Sleep Mode
Preset Mode Setting
Keep Warm
Warm/Reheat
ENERGY KEEP WARM Setting
AUTO CLEAN Mode
※
If the rice cooker is not operated for the given
amount of time while the power cord of the
rice cooker is connected, the rice cooker will
switch to Sleep mode.
※
If a button is pressed or the lid of the rice
cooker is open or close in Sleep mode, the
mode will be disabled.
※
In order to enable Preset mode, fl ash the
[MENU/TASTE CONTROL], [HOUR], [MIN],
and [COOK] keys by following a message.
Then, turn on the [PRESET] and [CANCEL]
keys to guide you through the buttons to be
used.
BT1000iD_ENG.indd 25 2012-09-18 �� 9:43:10