Cuchen BT10 Series, User Manual

Page: 11 / 64

11
Operating Instructions
Proper Assembly
Proper Attachment
※
The packing should maintain the round
shape of the clean cover.
※
If the clean cover is in an oval shape, it will mean that the
pressure packing is not properly attached. (In order to ensure
easy attachment, attach the pressure packing right after cleaning.)
Improper Attachment
Detachment and Attachment of the Pressure Packing
Detachment of the Pressure Packing
Attachment of the Pressure Packing
Verification of Attachment Status
Hold the outer part or the stainless steel and outer part of the clean cover first
and pull out the packing slowly to detach the packing.
(Clean the packing with a neutral kitchen detergent and a sponge.)
Insert the packing into the groove of the clean cover. As shown in the figure
on the right, turn the clean cover while pressing the inner and outer parts of
the packing with both of your thumbs, and press the packing.
- If the packing is not firmly attached to the clean cover, steam will escape and cook -
ing and keeping rice warm will be disabled. (Before attaching the pressure packing,
the bumps of the packing must fit into those of the clean cover.) See p.10.
Place the clean cover in a clean place. Then, turn and press the inner and
outer parts of the pressure packing with your thumb or index finger to firmly
insert the packing into the groove of the clean cover.
(Check if the packing is round.)
<Front View of the Clean Cover>
The texts should be shown properly, and the bumps of
the pressure packing and clean cover should be located
correctly.
<Rear View of the Clean Cover>
The texts are shown in the opposite order.
※
Do not insert screws or any other foreign object into the hole.
※
Carefully check the clean cover to determine which side
is the front and which is the back.
Text Shown Right
Side Up
Caution: If the pressure packing or inner packing is not properly
attached, it may cause steam to leak.
Caution: If the pressure packing is not completely attached, steam may escape.
BT1000iD_ENG.indd 11 2012-09-18 �� 9:42:01