Calibration
Calibrating the Ultrasound Sensors
CubiScan 125
52
3. Using a stylus or your finger, touch the center of each
x
on the screen
until the “x” turns green. There are five calibration points on the screen.
4. When all the
x
’s are green, the calibration is complete.
Calibrating the Ultrasound Sensors
You will need the 12'' x 5'' x 3.6'' calibration cube, supplied with the
CubiScan 125, to calibrate the sensors.
To calibrate the gate using the touchscreen, proceed as follows.
Figure 49
Touchscreen Calibration
