CubiScan 125 Operation Manual Download Page 37

Page: 37 / 96

Operation

Cubing and Weighing

CubiScan 125

Measuring/

Weighing Items

Using the

Ultrasound

Sensors

Take the following steps to measure and weigh an item using the
ultrasound sensors.

1. Verify that the CubiScan 125 platform is empty and that the gate is in

the home position so that it doesn’t interfere with the sensors. The zero
indicator should be lit.

2. Place the package or object to be cubed and weighed on the platform

and slide it against the back corner until it is in contact with both side
panels. The zero indicator light will go out.

OTE

Do not lean on or touch the CubiScan 125 platform or the object while an object is
being measured. Any kind of contact with the platform during the measurement
process can alter the weight or sensor reading.

Figure 22

Package on Platform

Summary of Contents for 125

































































































Search results

Summary of Contents for 125

Reviews:

Related manuals for 125

Brands by name

Popular brands

CubiScan 125, Operation Manual

Search results

Summary of Contents for 125

Reviews:

Related manuals for 125

Brands by name

Popular brands