36
7. LED and Button Operation
7.1 LED
LED Color
Description
Green/ Solid
This indicates that the power is on and the device is
ready to use.
Green/ Flash This indicates that the system is downloading data
from PC to internal memory and the printer is paused.
Amber
This indicates that the system is clearing data from
the printer.
Red / Solid This indicates printer head open or cutter error.
Red / Flash This indicates a printing error, such as head open,
paper out, paper jam, ribbon out or memory error
7.2 Button Operation
Feed
z
Press the button when the LED is
green
.
Printer advances to the beginning of the next label.
Pause
z
Press the feed button during printing
Printer pauses the print job.
Ribbon Sensor and
Gap/Black Mark
Sensor Calibration
1. Turn off the power switch.
2. Hold the feed button while turning on the power switch.
3 Release the button when LED begins blinking
red
.
(The printer will blink red 5 times).
Printer will calibrate the ribbon sensor & gap/black
mark medai sensor sensitivity.
The LED color will be changed as following order
：
Amber
Æ
red (5 blinks)
Æ
amber (5 blinks)
Æ
green (5 blinks)
Æ
green/amber (5 blinks)
Æ
red/amber (5 blinks)
Æ
solid green
Note:
Please select gap or black mark sensor by GAP or
BLINE command prior to calibrate the sensor.
