16
9. Arrange the lower inner cover back to the lower cover.
10. Install the cutter into the niches of the printer.
Fig. 26 Cutter module installation
11. Use a screwdriver to screw whole screws on the lower inner cover and the lower
cover.
12. Close the top cover by arranging the top cover support back to the flute
and push it forward then
close the
top
cover slowly.
3.6.1 Loading Label in Cutter Mode
1. Insert a 1” label spindle into a label roll.
2. Open the printer top.
3. Install the label roll onto the label roll mount.
4. Feed the paper, printing side face up, through the paper guide and pass over the
platen.
5. Lead the paper through the cutter label opening.
6. Adjust the paper guide by moving left or right to fit the paper width.
Niche
Cutter
