23
3. Release the button when
the
LED indicates
the
color for
the needed
function.
Power on utilities
The LED color will be changed as following pattern:
LED color
Functions
Amber
Red
(5 blinks)
Amber
(5 blinks)
Green
(5 blinks)
Green/Amber
(5 blinks)
Red/Amber
(5 blinks)
Solid green
1. Ribbon Sensor Calibration and Gap /
black mark sensor calibration
Release
2. Gap / black mark sensor calibration,
Self-test and enter dump mode
Release
3. Printer initialization
Release
4. Set black mark sensor as media
sensor and calibrate the black mark
sensor
Release
5. Set gap sensor as media sensor and
calibrate the gap sensor
Release
6. Skip AUTO.BAS
Release
4.3.1 Ribbon and Gap/Black Mark Sensor Calibration
Gap/black mark sensor sensitivity should be calibrated at the following conditions:
1.
First time
printer
use.
2.
When c
hang
ing
label stock.
3. Printer initialization.
Please follow the steps below to calibrate the ribbon and gap/black mark sensor.
1. Turn off the power switch.
2.
Press and h
old the
FEED
button
while
power
ing on the printer
.
3 Release the
FEED
button when LED
is
blinking
red
. (
The LED
will
blink red
5 times. You may release the feed button at any point while blinking red
).
Printer
will calibrate the ribbon sensor and gap/black mark
media
sensor sensitivity.
The LED color will change
in the
following order
：
Amber
Æ
red (5 blinks)
Æ
amber (5 blinks)
Æ
green (5 blinks)
Æ
green/amber (5
blinks)
Æ
red/amber (5 blinks)
Æ
solid green
Note:
Please select gap or black mark sensor by sending GAP or BLINE command to printer prior to
calibrating the sensor.
