3.3 Loading the Ribbon
1. Open the printer’s top cover by pulling the green top cover open levers located on
each side of the printer and lift the top cover to the maximum open angle.
2. Open the ribbon access cover.
Note:
1. In normal printing mode, ribbon access cover may open while the top cover opens.
The Ribbon access cover can be closed or open while the top cover is closed.
2. In peel and cutter mode, please open the top cover then the ribbon access cover can be
opened or closed.
3. Insert the ribbon right side onto the supply hub. Align the notches on the left side
with the matching nothces on the ribbons core and
mount onto the spokes.
4. Insert the paper core right side onto the rewind hub. Align the notches on the left
side and mount onto the spokes.
8
