Cub Cadet Yanmar SC2400, Operator'S Manual, Page: 58 / 150

8-8
8. OPERATE THE TRACTOR
Sc2400 Operator’s Manual
1. Slowly remove foot from the forward side of the
forward and reverse drive pedal or reverse side of
the forward and reverse drive pedal.
2. Fully push the throttle control lever forward to
decrease the engine speed.
3. Step on and depress the brake pedal.
4. After the tractor has completely stopped, turn off
the Power Take Off (PTO) switch.
5. Lower the implement (if equipped) to the ground.
6. Engage the parking brake securely.
7. Run the engine at a lowest possible speed for at
least for 2 minutes.
8. Turn the key to the OFF position.
9. Remove the key from the starter key switch.
10.Make sure that the engine and other rotating
component(s) have stopped running. NEVER
leave the operator’s seat while any component is
running.
(A) Forward and reverse drive pedal
(B) Throttle control lever
(C) Power Take Off (PTO) switch
■
Stop in an Emergency
1. Remove foot from the forward side of the forward
and reverse drive pedal or reverse side of the
forward and reverse drive pedal.
2. Depress the brake pedal.
3. Turn the key to the OFF position.
4. Keep the brake pedal pressed until all the moving
parts on the tractor come to a full stop.
5. Engage the parking brake securely.
3. Stop the Tractor
3013703a
(B)
(A)
3014919b
(C)