Cub Cadet Yanmar SC2400, Operator'S Manual, Page: 41 / 150

6-1
6. PRE-OPERATION CHECK
Sc2400 Operator’s Manual
6. PRE-OPERATION CHECK
●
Check the tractor for damage, excessive wear, cracks, missing parts,
exposed wiring and any other problems, including leaks.
●
Check the joints and connections for looseness.
●
Check that all the lights illuminate.
●
Check that all the safety-alert decals are in correct position.
If any problem is detected, contact your local Cub Cadet Yanmar dealer,
and correct the problem. NEVER operate the tractor when a problem has
been indicated.
● ALWAYS be aware of the limitations of the performance of the tractor.
●
Operate the tractor, keeping in mind “SAFETY FIRST!”.
●
Check the safety features.
●
Check the tire pressure.
● Check that the remaining diesel fuel is sufficient for the intended
operation.
●
Check the engine oil level.
●
Check the transmission/hydraulic oil level.
●
Check the coolant level.
●
Remove grass clippings and debris from the tractor.
● Clean the air cleaner element.
●
Check the tractor for any leaks such as oil, coolant and fuel.
●
Check the radiator for possible blockage.
●
Check the retractable seat belt and the Roll-Over Protective Structure
(ROPS) for any problem.
If any problem is detected, contact your local Cub Cadet Yanmar dealer
and correct the problem.
●
Only wipe off the tractor after washing.
●
Chemical agents such as pesticides can damage the plastic surfaces and
painted surfaces. NEVER spray chemical agents near the machine.
● NEVER spill diesel fuel onto the tractor. Diesel fuel can damage the
plastic surfaces and painted surfaces. ALWAYS wipe up spilled diesel
fuel immediately.
1. Pre-Operation Check
2. Precautions before the Operation
3. Routine Check
4. Prevent Damage to the Plastic Surfaces and Painted Surfaces