Cub Cadet LH5 H60, Manual, Page: 25 / 159

25
Troubleshooting
EN
Troubleshooting
WARNING!
Risk of injuries or material damage
¾
In case of doubt always take your device to a specialist workshop.
¾
Before any inspection or any work on the device, switch off the motor and remove the power
pack.
Problem Possible cause Remedy
The device switch-
es off.
The power pack is too hot. Allow the power pack to cool.
The power pack is discharged. Charge the power pack.
The temperature of the device (electronics) is too
high.
Allow the device to cool and if necessary,
clean the ventilation slots
Overcurrent release If this occurs again take your device to a
specialist workshop.
The device will not
switch on.
The power pack is discharged. Charge the power pack.
Overvoltage release If this occurs again take your device to a
specialist workshop.
Overcurrent release If this occurs again take your device to a
specialist workshop.
Power pack temperature too high or too low. Allow the power pack to cool down or
heat up.
The power pack is defective. Replace the power pack.
The cutting blade
becomes hot.
The cutting blade is blunt. Consult a specialist workshop.
There is a lot of friction because of a lack of
lubrication.
Oil the cutting blade.
Uneven running,
severe vibration of
the hedge trimmer.
The cutting blade is damaged. Consult a specialist workshop.
The cutting blade fastening has come loose. Consult a specialist workshop.
Warranty
The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your device
free of charge, insofar as material or manufactu-
ring defects are the cause. To make a claim under
warranty please contact your seller or your nearest
branch.
CE Declaration of Conformity
Further details about the device are con ‑
tained on the separately enclosed CE Decla‑
ration of Conformity, which forms part of this
instruction manual.
Environmentally-friendly disposal
Power tools, accessories and packaging must be
disposed of via an environmentally compatible recy-
cling chain.
Power packs/batteries:
Do not dispose of power packs/batteries
in domestic waste, by burning or throwing
into water. Power packs/batteries must be
collected, recycled or disposed of in an
environmentally-friendly manner.
Power tools (without power packs/batteries):
Do not throw your old power tool away with the
domestic waste. Take it to a disposal facility.