1. INTRODUCTION
Thank you for using the 7x10/100TX plus 2x100FX managed converter switch. The built-in
management module allows user to configure this managed converter switch and monitor
the operation status locally or thru network remotely.
1.1 Management Options
LED
Fig. 1 Front Panel
RS-232
Duplex SC
Connector
Fig.
2
Back
Panel
Management switch are available options are listed below:
•
Local Console Management
•
Telnet
Management
•
SNMP
Management
Local Console Management
Local Console Management is done through the RS-232 DB-9 console port located at the
front of the converter switch. Direct RS-232 cable connection between the PC and the
converter switch is required for this type of management.
Telnet Management
Telnet is done through the network. Once the converter switch is on the network with proper
configuration, you can use Telnet to log in and monitor the status remotely.
SNMP Management
SNMP is also done over the network. Besides standard MIB (Management Information
Bases), an additional private MIB is also provided for SNMP-based network management
system to compile & control.
4
