Tag Priority Map:
Use spacebar to select 0,1,2,3 tag values as priority level. The second
field is up to first field use which TAG with what kind of queue.
Ingress Rate Limit Mode:
There are two options, first field is All Frames and Broadcast.It
could be toggle by space bar, All Frames mean limit all of frames pass. Broadcast mean
only broadcast frame will be limited. Second field, FrameBits and TotalBits as well as
ToIFG could be toggle by space bar. FrameBits mean a frame without packet
preamble byte, TotalBits mean a complete frames, it longer than Framebits. ToIFG
mean TotalBits add Inter Frame Gap. It is longer than TotalBits. This field provides rate limit
more selectable options.
Port Ingress:
Four modes using spacebar to select off, 128k, 256k, 512k, 1M, 2M, 4M up to
8MB. This parts also work with port priority, if port ingress choose 512k and port priority
choose Q4,according ratio the Ingress values in not only 512k but also 2M. If port priority
choose Q2 them Ingress would be 1M.
Port Engress:
Four modes using spacebar to select off, 128k, 256k, 512k, 1M, 2M, 4M up
to 8MB. This is rate limit function depend on various speeds according selection. Port
Engress in rate limitation is not similar to Ingress.
31
