2.7 Network Management
In order to enable network management of the converter switch, proper network
configuration is required. To do this, select option
Network Management
from the Console
main menu, following screen appears.
1. Network Configuration:
Setup the required IP configuration of the converter switch.
2. System Service Management:
Enable or Disable the specified network services.
3. RS232/Telnet/Console Configuration:
View the RS-232 port setting, specified
Telnet & Console services.
4. Device Community:
View the registered SNMP community name list. Add a new
community name or remove an existing community name.
5. Trap Destination:
View the registered SNMP trap destination list. Add a new trap
destination or remove an existing trap destination.
6. Trap Configuration:
View the converter switch trap configuration. Enable or disable
a specified trap.
20
