49
Gateway(config-mac-No.)#
no destination port-number
Return port number to default value 1
Gateway(config-mac-No.)#
no mac-address
Return MAC address to default value
00:00:00:00:00
Gateway(config-mac-No.)#
no protocol
Return protocol to default value TCP.
Gateway(config-wan-No.)#
no active
Disable the configured WAN rule.
Gateway(config-wan-No.)#
no destination ip
Return IP address to default value 0.0.0.0
Gateway(config-wan-No.)#
no destination port-number
Return port number to default value 1
Gateway(config-wan-No.)#
no protocol
Return protocol to default value TCP.
Gateway(config-wan-No.)#
no source-ip-range
Return IP address to default value 0.0.0.0
Show Command
Gateway(config)# show
security packet-filter
Shows all the security packet rule table,
including Application, LAN, MAC and
WAN table.
Gateway(config-
application-No.)# show
Shows the specified application packet
rule.
Gateway(config-lan-No.)#
show
Shows the specified LAN packet rule.
Gateway(config-mac-No.)#
show
Shows the specified MAC packet rule.
Gateway(config-wan-No.)#
show
Shows the specified WAN packet rule.
3. Set up URL Filter
Command
Parameter
Description
Gateway(config)# security
url-filter
Enable the URL filter function. URL Filter
enables the network administrator to deny
computers to access the specific websites
on the Internet from the private network of
the Residential Gateway.
Gateway(config)# security
url-filter apply
Apply all the configured url filter settings
made.
Gateway(config)# security
url-filter [1-10]
[1-10]
Specify the entry number of URL filter.
Gateway(config-url-No.)#
active
Enable the URL rule.
Gateway(config-url-No.)#
url [URL/IP]
[URL/IP]
Specify the URL address which this rule
will deny.
No Command
Gateway(config)# no
security url-filter
Disable URL function.
Gateway(config)# no
security url-filter [1-10]
[1-10]
Delete the URL rule.