10 October 2016
8
Figure 5
5 Wireless Network Activation – Z4400 3G (GSM/UMTS/HSPA)
Activating a Z4400 on a GSM/HSPA network is performed by inserting a Subscriber Identification Module (SIM) In the
appropriate SIM connector and filling in information on the Wireless Interface screen that will have been provided by
the Network Operator or Carrier providing the SIM.
At a minimum, you will need to enter the APN provided into the Profile Name field on the Wireless Interface and in most
cases will also need to enter an Authentication Type (PAP, CHAP, or both).
Additional information that may be required is:
PDP Address – Seldom used
User Name – May be associated with the network or with an individual SIM
Password - May be associated with the network or with an individual SIM
SMSC Address
Email Gateway
In addition, a specific network ID may be entered to control unwanted roaming in specific areas.
If the Z4400 contains the dual-SIM feature two SIM cards may be installed and managed as described in section 3.5
above.
