CTD CM325R, Instruction Bulletin & Maintenance Manual, Page: 20 / 34

No. Description 200R Part No.
200R SPINDLE ASSEMBLY
1 Spindle, Right Hand 2BM02R
Spindle, Left Hand 2BM02L
2 Flange 200BM03
3 Slinger 200BM04
4 Bearing (2 required) 2B2P05
5 Snap Rings (2 required) 2B2P06
6 Preload Belleville Springs (4 required) 2B2P07
7 Spindle Spacer 2BM05
8 Spindle Pulley 2B4P23
9 Pulley Jam Nut, Right 151P16R
Pulley Jam Nut, Left 151P16L
10 3V335 Drive Belt, (2 required) 2B4P25
11 200 Series Arm, Right 200BC01R
200 Series Arm, Left 200BC01L
12 Spindle Nut, Right Thread** 2B1P36
Spindle Nut, Left Thread** 2B1P37
13 Pulley Key 2BM23
14 Spindle Assembly, Left & Right 200BE21L&R (consists of Items No. 1 - 7,9 and 12 with precision
ground Slinger)
**Note: A Spindle Nut,
Left thread
is used on the
Right hand saw
, facing it from the front.
Belt guard is on right side, blade guard is on left side.
No. Description Part No.
CM325R SPINDLE ASSEMBLY
1
Spindle, Right Hand 30BM02R
Spindle, Left Hand 30BM02L
2 Flange 30BM03
3 Slinger 30BM04
4 Inside Bearing 30B2P05
5 Snap Ring (2 required) 9B2P06
6 Belleville Spring (4 required) 9B2P05
7 Outside Bearing 9B2P04
8 Spindle Pulley 30B4P23
9 Pulley Jam Nut, Right 151P16R
Pulley Jam Nut, Left 151P16L
10 3VX425 Drive Belt (2 required) 30B4P25
11 CM325R Arm, Right 30C01R
CM325R Arm, Left 30C01L
12 Spindle Nut, Right 30B1P36R
Spindle Nut, Left 30B1P37L
13 Pulley Key 2BM23
14 Spindle Assembly 30BE12L&R (consists of Items No. 1 - 7,9 and 12 with precision
ground Slinger)
200R SERIES AND CM325R PIVOT SHAFT ASSEMBLY
Assemble preload springs back-to-back as shown.
Pivot Shaft Parts:
A.
Pivot Shaft, P/N 3BM08
B. Pivot Bearing, P/N 2B2P05 (2 required)
C. Pivot Belleville Spring, P/N 3B2P10 (2 required)
D. Pivot Snap Ring, P/N 3B2P11 (2 required)
-18-