manualshive.com logo in svg

CTC Union IP DSLAM for ADSL IPDSLAM-A8/A16, User Manual

Share
Download
CTC Union IP DSLAM for ADSL IPDSLAM-A8/A16 User Manual Download Page 64

ADSL IP DSLAM 

 
 

                                                                 

 

56 

Table 4-1    CLI Command - Action List 

<action> Description 
show 

Used to view information of the selected identifier and 
parameters. 

add 

Used to add configuration of objects according to the identifier 
and parameters. Parameters are used for selecting specific 
facility and arguments. For example, “16” specifies the 16

th

 port 

of ADSL IP DSLAM. 

config 

Used to set or modify existing configuration of objects 
corresponding to the identifier and parameters. But lineprof 
name -default and alarmprof name default can not be 
configured. 

delete 

Used to delete configuration of objects corresponding to the 
identifier and parameters. If the delete action is confirmed, the 
configuration of objects will no longer exist. 

help 

Used to view the detailed usage of CLI commands. 

history 

Used to view the list of CLI commands that the user have used.

reset 

Used to reset a port of system. 

restart 

Used to restart the system. 

save 

Used to save the configuration to Flash RAM. 

default 

Used to restore the default setting to system. 

upgrade 

Used to upgrade the system file. 

exit 

Used to terminate the CLI. 

 

Table 4-2 CLI Command – Identifier List 

<identifier> 

Description 

sysinfo 

Allow users to view or config the whole system information of 
ADSL IP DSLAM. 

sysip 

Allow users to view or config IP of system. 

snmp 

Allow users to view or config VID and community for SNMP.

time 

Allow users to view or config the current system date and 
time. 

sntp 

Allow users to view, add, delete or config sntp.   

user 

The users’ information of system. 

password 

Allow users to modify him (herself) password. 

subscriber 

Allow users to view, add, delete or config the basic 
information of the subscriber of each port. 

event 

Allow users to view the events of system. 

trapdest 

Allow users to view, add or delete the trap destination. 

manip 

Allow users to view, add, or delete management IP groups. 

portfilter 

Allow users to view or config port-filter status. 

port 

Allow users to view or config status and information of each 
port, or allow users to enable/disable port. 

route 

Allow users to view, add or delete the routing node in the 
routing table. 

connection 

Allow users to view or config the connection information of 
each port sorting by port id. 

vid 

Allow users to view the vid information sorting by VLAN ID. 

lineprof 

Allow users to view, add, delete or config ADSL line profile. 

alarmprof 

Allow users to view, add, delete or config the alarm threshold 
values in an ADSL. 

adslline 

Allow users to view or config the information of ADSL line. 

Summary of Contents for IP DSLAM for ADSL IPDSLAM-A8/A16













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands