CTC Union IP DSLAM for ADSL IPDSLAM-A8/A16 User Manual Download Page 36

Page: 36 / 140

ADSL IP DSLAM

3.7 Configuring ADSL IP DSLAM

This section describes how to configure your ADSL IP DSLAM by selecting

System

from EmWeb Menu. This section will cover all the function from

System

Menu. It includes:

Configuring Port Filtering {Set Port Filter}

Allow you to configure the port filtering function.

1. Click on “

Set Port Filter

” from the System Menu.

The

Set Port Filter

screen appears as follows:

2. Click on

Enabled

button to allow each ADSL port to communicate back and

forth with the uplink Ethernet port only.

By selecting

Disabled

button you allow all ADSL ports to communicate with

each other and also with the uplink Ethernet port.

3. Press

Apply

button in order to submit your configuration.

Note

: Make sure to save all the configurations in flash by selecting

Save to

Flash

from main menu when you want to restart your ADSL IP DSLAM.

Summary of Contents for IP DSLAM for ADSL IPDSLAM-A8/A16













































































































































Search results

Summary of Contents for IP DSLAM for ADSL IPDSLAM-A8/A16

Reviews:

Brands by name

Popular brands

CTC Union IP DSLAM for ADSL IPDSLAM-A8/A16, User Manual

Search results

Summary of Contents for IP DSLAM for ADSL IPDSLAM-A8/A16

Reviews:

Brands by name

Popular brands