CTC Union IP DSLAM for ADSL IPDSLAM-A8/A16 User Manual Download Page 37

Page: 37 / 140

ADSL IP DSLAM

Configuring IP and Location {System IP / Location}

Allow you to configure the system IP address and location.

1. Click on “

System IP / Location

” from the System Menu.

The

System IP / Location

screen appears with the default setting and can be

configured as follows:

2. Configure the IP address you want to set, say

192.168.0.76

3. Configure the subnet mask with reference to IP address, say

255.255.255.0

4. Configure the gateway with reference to IP address, say

192.168.0.1

5. Configure the system name you want to set, say ADSL IP DSLAM

6. Configure the location of your ADSL IP DSLAM.

7. Configure the contact information for servicing ADSL IP DSLAM.

8. Click on the

Apply

button to submit your changes, or click on the

Cancel

button if you want to clear all the values you have configured.

Note

: If you changed the Web Server's IP address, you must change the HTTP

URL Address on your web browser, after your pressing the "Apply" button,
(The TCP/IP setting of the network may need to re-configure).

Summary of Contents for IP DSLAM for ADSL IPDSLAM-A8/A16













































































































































Search results

Summary of Contents for IP DSLAM for ADSL IPDSLAM-A8/A16

Reviews:

Brands by name

Popular brands

CTC Union IP DSLAM for ADSL IPDSLAM-A8/A16, User Manual

Search results

Summary of Contents for IP DSLAM for ADSL IPDSLAM-A8/A16

Reviews:

Brands by name

Popular brands