36
Set
Rate Limit (Kbps)
Click
Apply/save
to add this QoS class
Routing
The section shows the IP addresses or address routes for the computers connected
to the gateway to reach different destinations, such as the local network, the gateway,
or the Internet. The Routing feature provides four more setting pages including
Default Gateway, Static Route, Policy Routing and RIP. Default gateway interface list
can have multiple WAN interfaces served as system default gateways but only one
will be used according to the priority with the first being the highest and the last one
the lowest priority if the WAN interface is connected. Priority order can be changed by
removing all and adding them back in again.
Default Gateway
Figure 45: Default Gateway Configuration
Global Setting
Select WAN interfaces in the
Available Routed WAN Interfaces
and move them
into
Selected Default Gateway Interfaces
.
Set
Selected WAN Interface
from the list
Click
Apply/Save
to save the configuration
Summary of Contents for GW-632FW
Page 1: ...I GW 632FW Active Ethernet IAD with VoIP Wireless LAN and Gigabit Ethernet Switch...
Page 21: ...16 Figure 13 Device Voice Status...
Page 91: ...86...
Page 92: ...87...
