19
Figure 17: WAN Service Setup
– Select a layer 2 interface
Click “Next” to continue the configuration. The parameters of each following page will
be varied and depended on the WAN layer 2 interface (default mode or VLAN MUX
mode). Most of cases the VLAN MUX mode covers the settings of default mode. The
VLAN MUX mode will be introduced and described in details.
Figure 18: WAN Service Configuration
To configure WAN Service Configuration:
Select the
WAN service type
: PPPoE, IPoE or Bridge
Enter the
Service Description
Enter
802.1P priority [0-7]
, set -1 for untagged service
Enter
802.1Q VLAN ID [0-4094]
, set -1 for untagged service
Check to
enable IPv6 service
if necessary
Click
Next
Summary of Contents for GW-632FW
Page 1: ...I GW 632FW Active Ethernet IAD with VoIP Wireless LAN and Gigabit Ethernet Switch...
Page 21: ...16 Figure 13 Device Voice Status...
Page 91: ...86...
Page 92: ...87...
