25
interface
if there are two separated networks in the LAN sharing the device to
surf Internet. Then enter the
second IP address
and
subnet mask
.
Click
Apply/Save
to save setting or
Save/Reboot
to save and then reboot the
device
IPv6 Autoconfig
IPv6 is supported in this device. Below page allows to configure the LAN site of device
with IPv6 settings.
Figure 27: LAN IPv6 Auto Configuration
Global Settings:
Enter the
IPv6 address
Check to enable/disable
IPv6 DHCP server
. If enable IPv6 DHCP server, choose
“
stateless
” or “
stateful
” with
start interface ID
,
end interface ID
and
leased time
.
Check to enable
RADVD
with
Prefix
,
Preferred Lift Time
, and
Valid Life Time
if
enable ULA Prefix Advertisement.
Check to enable
MLD snooping
with
standard mode
or
blocking mode
Click
Save/Apply
to save the settings.
NAT (Network Access Translation)
The NAT feature provides the basic firewall feature to avoid hacker attacks from
remote site. There are three more setting pages including virtual server, port trigger,
and DMZ to provide specified service for remote users.
Summary of Contents for GW-632FW
Page 1: ...I GW 632FW Active Ethernet IAD with VoIP Wireless LAN and Gigabit Ethernet Switch...
Page 21: ...16 Figure 13 Device Voice Status...
Page 91: ...86...
Page 92: ...87...
