CTC Union GSW-3420FM, User Manual

Page: 18 / 145

6.2 Web, Telnet, and SNMP Interfaces
6.2.1 Web Interface Connection
Users can manage the switch with Http Web Browser connection. The default
IP setting is
192.168.1.1 and NetMask 255.255.255.0 . The default IP Gateway
is 192.168.1.254 . Before http connection, IP address configuration of the switch
could be changed first.
1 Please follow the instruction in Section 6.1 to complete the console
connection.
2 Login in with “ admin ” (password is also “ admin ” by default.)
3 Use “ show ip interface brief ” command to check IP address of the switch
first.
4 If IP address needs to be changed, follow the steps ...
4.1 Enter “ config ” command, and the prompt will become “(config)#”.
4.2 Enter “ interface vlan 1 ” command, and the prompt will become
“(config-if-vlan)#”.
4.3 Enter “ ip address xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy ” command
( xxx.xxx.xxx.xxx is the IP address and yyy.yyy.yyy.yyy is the
netmask) to modify IP address of the switch.
4.4 Enter “ exit ” command to go back to “(config)#” prompt.
4.5 If IP Gateway will be set, enter “ ip route xxx.xxx.xxx.xxx
yyy.yyy.yyy.yyy zzz.zzz.zzz.zzz ” command to create a IP route entry.
xxx.xxx.xxx.xxx is the the destination IP network or host address of
this route. yyy.yyy.yyy.yyy is the destination IP network or host mask.
zzz.zzz.zzz.zzz is the IP address of Gateway.
4.6 Enter “ exit ” command to go back to “#” prompt.
4.7 Enter “ show ip interface brief ” to check the IP settings.
4.8 Enter “ copy running-config startup-config ” to save it.
After IP address configuration done and the switch is connected to network,
users can start Http connection by entering IP address of the switch to the web
address line in Web Browser. A login screen will be prompted for user name
and password. The default user name and password is "
admin " / ” admin ”.
Then the management homepage will appear.
15