command can leave this mode.
“interface” command has another sub-command “
vlan
”. IP address of the
switch can be configured in this mode.
----------------------------------------------------------------
(config)# interface vlan 10
(config-if-vlan)#
----------------------------------------------------------------
<< Function Keys >>
Here is the function keys for console interface.
[
Tab
] key: this key can help to get the full command keyword with just several
beginning letters. For example, “his-Tab” will get the full “history” command
word.
[
Esc
] key: this key can use to break message display and go back to command
prompt.
[
Up-Arrow
] key: this key can get last input command.
[
Down-Arrow
] key: this key can get next input command.
[
Left-Arrow
]/[
Right-Arrow
] key: the key can move the cursor.
[
Backspace
] key: this key can delete the letter in front of cursor
[
?
] key: this key can get the command list.
<< Command Mode >>
There are four command modes for console interface.
1. General Basic Commands
These are basic commands after login. Users can show switch
configuration/status, ping network device, reboot switch, ... The prompt is
“
#
”.
2. Configure Mode Commands
With “configure terminal” command, user can enter Configure Mode.
Commands in Configuring Mode are for general switch settings. And its
prompt is “
(config)#
”.
3. Interface Configuring Commands for Port / VLAN Group
If the settings are for ports, it is done with “interface
GigabitEthernet
1/x”
command in configure mode. And the prompt will become “
(config-if)#
”. For
example, “interface ethernet 1/5” is for settings on Port 5.
If the settings are for VLAN group, it is done with “interface vlan x” command
in configure mode. And the prompt will become “
(config-if-vlan)#
”. For
example, “interface vlan 100” is for settings on VLAN 100.
4. VLAN Configuring Commands
If the settings are general VLAN settings, it is done with “vlan x” command in
configure mode. And its prompt will become “
(config-vlan)#
”.
13
Summary of Contents for GSW-3420FM
Page 64: ...Status by Command show tacacs server 61 ...
Page 79: ...76 ...
Page 144: ......
Page 145: ......