CTC Union GSW-3420FM, User Manual

Page: 101 / 145

7.12.4 Protocol-based VLAN
With protocol-based VLAN membership, computers are assigned to VLANs by
using the protocol that is in use. For example, this method enables an
Internetwork Packet Exchange (IPX) network or Internet Protocol (IP) network to
have its own VLAN.
Configuration by Web :
Create/Delete Protocol to Group Mapping :
[Configuration] -> [VCL] -> [Protocol-based VLAN] -> [Protocol to Group]
Click “
?
” at this web page to get details of the settings.
Create/Delete Group to VLAN Mapping :
[Configuration] -> [VCL] -> [Protocol-based VLAN] -> [Group to VLAN]
Click “
?
” at this web page to get details of the settings.
Configuration by Command :
Add/Delete Protocol Group :
(config)# vlan protocol { { eth2 { <0x600-0xffff> | arp | ip | ipx | at } } | { snap
{ <0x0-0xffffff> | rfc_1042 | snap_8021h } <0x0-0xffff> } | { llc <0x0-0xff>
<0x0-0xff> } } group <word16>
(config)# no vlan protocol { { eth2 { <0x600-0xffff> | arp | ip | ipx | at } } | { snap
{ <0x0-0xffffff> | rfc_1042 | snap_8021h } <0x0-0xffff> } | { llc <0x0-0xff>
<0x0-0xff> } } group <word16>
Add/Remove ports to Protocol-based VLAN :
(config-if)# switchport vlan protocol group <word16> vlan <vlan_id>
(config-if)# no switchport vlan protocol group <word16> vlan <vlan_id>
Status by Web :
[Configuration] -> [VCL] -> [Protocol-based VLAN] -> [Protocol to Group]
[Configuration] -> [VCL] -> [Protocol-based VLAN] -> [Group to VLAN]
Click “
?
” at this web page to get details of the settings.
Status by Command :
98