CTC Union EcoZenith i350 H, Installation And Maintenance Manual

Page: 83 / 116

83
CTC EcoZenith i350
11.11 Communication
These settings are activated for the accessory’s superior
systems and are not used in normal operation. They are
not described in these instructions.
Cooling
Common Heating and Cooling No
Condense Secured? No
Room temp cooling 25.0
Smart low price ºC 1
Smart overcapacity ºC 2
11.12 Cooling
Cooling is adjusted using primary flow sensor 2 (B2),
which means that heating circuit 2 and cooling cannot
be used simultaneously.
Common Heating and Cooling No (No/Yes)
For more information, see the instructions for
EcoComfort.
Condense Secured? No (No/Yes)
If a condense pipe for the system has been secured,
significantly lower temperatures are permitted at
various points in the system. WARNING Build-up of
condensation in the house structure can lead to damp
and damage from mildew.
(No) means a setting range for room temperature of
18–30ºC and (Yes) means a setting range of 10–30ºC
In the event of doubt, contact an expert surveyor for an
assessment.
Room temp cooling 25.0 (10.0 or 18.0 to 30.0)
This is used to set the desired room temperature for
cooling.
Smart low price ºC 1 (Off, 1 to 5)
Find out more in section “Smart Grid”.
Smart overcapacity ºC 1 (Off, 1 to 5)
Find out more in section “Smart Grid”.