manualshive.com logo in svg

CTC Union EcoZenith i350 H, Installation And Maintenance Manual, Page: 19 / 116

Share
Download
CTC Union EcoZenith i350 H Installation And Maintenance Manual Download Page 19

19

CTC EcoZenith i350

 

!

CTC EcoZenith i350 is only approved for installation together with CTC Heat pumps. 
See the recommended systems at the start of the installation instructions.

5.7 

Install pipes to and from the heat pump

Heat pump 

5.7.1  Install pipe to the heat pump with solenoid i lter ball valve

5.7.2  Install pipe from the heat pump

Install any adjustable bypass coupling past the heat pump.

(*for electrical operation only without a heat pump, bypass coupling is 

performed) 

4.7.1
to heat pump, solenoid 
filter ball valve with 
support sleeves are 
fitted, see instructions 
in additional pack

drainage valve fitted for 
high model

4.7.2
from heat pump

*  without a heat pump, 

to and from heat pump 
must be connected 
togetherväxelventil VV/VS

diverting valve 
DHW/HS

electric flow heater 

circulation pump

4.7.1

Low version

4.7.2

High version

Summary of Contents for EcoZenith i350 H





















































































































Reviews:

No comments