CTC EcoEl
End user information
17
Indoor Temp
. . . .
.
. . . .
(50)
-
+
Adjustment
Menu Time setting
(at the top of the normal display menu)
Day and time can be set here. The clock is metered by the mains electricity
network frequency (50 Hz). If there is a power cut, reset the clock. The clock re-
starts at the time immediately before the power cut ± 5 minutes. Summer time/
winter time is set manually.
Day
Mon
Set current day (Monday...Sunday).
Time
00:00
Set current time (00:00… 11:59 pm)
Menu Indoor temperature
(the menu can be accessed
directly from the main menu)
(when “operation without room sensor” is
selected)
The room temperature is set in this menu if a room sensor has not been fitted
(selected in the settings menu). The house’s basic settings are first set in the
“house parameters” menu, usually with the help of the installation contractor.
Basic settings are then fine tuned using this menu.
If the indoor temperature is experienced as being too low or too high, move the
cursor t (increase) or – (reduce). Move a little at a time and see what effect
this has on indoor temperatures (1 day) before making further changes. Several ad-
justments may be necessary at different outdoor temperatures. However, a correct
setting will be arrived at which will not require further changing. A reference value
(for example 50) is displayed under the bar. This value depends on the basic value
set. If the bar does not extend far enough to allow the correct indoor temperature
to be obtained, the basic setting must be adjusted in the Installer/Settings/Setting
house paramet. The cursor is then centred in relation to the new values.
NOTE: radiator thermostats must be fully open and fully functioning
when adjusting the system.
Time setting
Day
Mon
Time
00:00