CTB F4420125 Manual Download Page 6

The Rondomat 3S has been built in accordance with the latest technology and the 
recognized technical safety rules. However, its use may lead to the risk of physical or 
lethal injury to the user or third parties and/or damage to the machine and other 
property. 

The Rondomat 3S must only be used if it is in a technically perfect condition and in 
line with its intended use, duly observing all safety risks and in accordance with the 
Operating Instructions! Immediately remedy any malfunctions which may affect 
safety! The Rondomat 3S: 

has been developed specifically for the feeding of piglets.

must be installed and connected in keeping with the Assembly Instructions. Only
then is its safe operation possible and only then will the system work without any
problems.

must be operated in keeping with the ambient conditions laid down, i.e. in a
temperature range of 

50

o - 

10

4

F

 

(10

o

– 40°C

)

.

must be operated only with acid-free water.

Any use deviating from or exceeding this is considered to be improper. The 
manufacturer is not liable for any damage resulting from such non-intended use. 
Observing the Operating Instructions, specifically the safety instructions, and the 
inspection and maintenance specifications is also an integral part of the intended 
use. 

Summary of Contents for F4420125


















Reviews: