CTB F4420125 Manual Download Page 17

Note:  The original, authoritative version of this manual is the English version produced by CTB, Inc. or any of its 

subsidiaries or divisions, (hereafter collectively referred to as "CTB").  Subsequent changes to any manual made 

by any third party have not been reviewed nor authenticated by CTB.  Such changes may include, but are not 

limited to, translation into languages other than English, and additions to or deletions from the original content.  

CTB disclaims responsibility for any and all damages, injuries, warranty claims and/or any other claims 

associated with such changes, inasmuch as such changes result in content that is different from the authoritative 

CTB-published English version of the manual.  For current product installation and operation information, please 

contact the customer service and/or technical service departments of the appropriate CTB subsidiary or division. 

Should you observe any questionable content in any manual, please notify CTB immediately in writing to:  CTB 

Legal Department, P.O. Box 2000, Milford, IN 46542-2000 USA.

Contact your nearby Chore-Time distributor or representative for additional parts and information.

Distributor Contact Information

Name: _____________________________________

Phone Number: _____________________________

Email: _____________________________________

PigTek, A Division of 

CTB Inc.

401 East Syracuse Street

P.O. Box 2000 • Milford, Indiana 46542-2000 • U.S.A. 

Phone (574) 658-

5000

 • Fax (

800

236-6118

E-Mail: 

sales

@

pigtek.net

 • Internet: http//www.

pigtekamericas

.com

Printed in the U.S.A.

Summary of Contents for F4420125


















Reviews: