Operation Manual
NORM-O-TEMP
®
, Model 111Z
Page 38 of 50
G.
Rinse the unit three (3) times as described in Steps D-F. Be sure to omit the household
bleach (sodium hypochlorite).
H.
After the third rinse, drain the unit and fill the reservoir with distilled water and circulate.
I.
Check the water with pH strips or other appropriate test method for detecting bleach. If
bleach is detected, repeat Steps F-H.
J.
If unit is being placed in dry storage, skip steps K and L, continue with procedure at step
M.
K.
If unit is to be
returned to service, once no bleach is detected, add the appropriate
amount of U.S.P. Grade Propylene Glycol to the water reservoir per the following chart:
UNIT
U.S.P. Grade Propylene Glycol Per Unit
NORM-O-TEMP
®
, 111Z
12 ounces (340cc)
L.
Continue to fill water reservoir with distilled water. Then continue procedure at step O.
M.
When all fluid has been removed from the unit, disconnect the drain hose(s) and wipe
unit clean.
N.
Unit is now ready for storage.
When you are ready to return unit to service, replenish reservoir(s) with distilled water
and 340 cc propylene glycol. Perform all checks as described in the respective Manual.
O.
Document unit maintenance.
Summary of Contents for Norm-o-Temp 111Z
Page 13: ...Operation Manual NORM O TEMP Model 111Z Page 13 of 50 Figure 1 NORM O TEMP unit Front View...
Page 15: ...Operation Manual NORM O TEMP Model 111Z Page 15 of 50 Figure 2 NORM O TEMP unit Left Side View...
Page 17: ...Operation Manual NORM O TEMP Model 111Z Page 17 of 50 Figure 3 NORM O TEMP unit Rear View...
Page 49: ...NORM O TEMP Model 111Z Page 49 of 50 THIS PAGE INTENTIONALLY LEFT BLANK...
