6 • DGT2 - DGT10
Thank you for purchasing the Electronic Digital Transit/Theodolite. Please read this
manual thoroughly before operation
MODELS
56-DGT2 2 Sec. Electronic Digital Transit/Theodolite
56-DGT10 5 Sec. Electronic Digital Transit/Theodolite
Copyright© 2005-2006 CST/Berger. All rights reserved
The information contained herein is proprietary information of CST/Berger, and is subject to
change without notice.
This document shall not be copied or otherwise reproduced without CST/Berger's written consent.
FEATURES FIG.1
1
Targeting Sight
11
Carrying Handle
2
Objective Lens
12
Handle Screw
3
Horizontal Clamp Knob
13
Plate Level
4
Horizontal Tangent Screw
14
Tribrach Clamp Knob (DGT10 Only)
5
Display Window
15
Battery Case
6
Operation Keys
16
Focusing Knob
7
Leveling Screws
17
Eyepiece
8
Instrument Center Mark
18
Vertical Clamp Knob
9
Optical Plummet
19
Vertical Tangent Screw
10
Tripod Base Plate
20
Circular Level (DGT10 Only)
CALIBRATION
This quality CST/Berger instrument has been inspected twice for accuracy before leaving the
factory. The instrument has also been given the best protection possible against damage during
transportation. Even with these precautions, the instrument is subject to rough handling during
shipment. To protect yourself against the possibility of using an instrument which is out of
adjustment, we suggest that you have the instrument checked by a competent person before
using it.
Note:
Please read the manual thoroughly before starting the following test.
The following test can be performed to check the instrument’s accuracy:
Set up the instrument in an area that is as level as possible and which is about 220 feet long. Place
two matching level rods (or drive two pieces of strapping into the ground)about 200 feet apart with
EN
