CSL CS203X User Manual Download Page 212

Page: 212 / 347

USER'S MANUAL, VERSION 2.0

212

8.9

Event Management

Event is the most important part of the reader configuration. By setting it intelligently, one can

handle many business applications autonomously with no interactive computation requirements

needed from remote server. To create and enable an event, one needs to set up triggers,

resultant actions, and then use that to assemble events. Once an event is created, the reader

would run according to it continuously, and will continue even if the reader is powered down

and up (rebooted). In other words, the reader is running autonomously.

Summary of Contents for CS203X



































































































































































































































































































Search results

Summary of Contents for CS203X

Reviews:

Related manuals for CS203X

Brands by name

Popular brands

CSL CS203X, User Manual

Search results

Summary of Contents for CS203X

Reviews:

Related manuals for CS203X

Brands by name

Popular brands