VCC-HD3 Rev. 905-0051-Z0
©2016 CIS Corporation. All rights reserved.
2
1.
Handling Precautions
The camera module must not be used for any nuclear equipments or aerospace equipments with which
mechanical failure or malfunction could result in serious bodily injury or loss of human life. Our warranty does
not apply to damages or defects caused by irregular and/or abnormal use of the product.
Please observe all warnings and cautions stated below.
Our warranty does not apply to
damages or malfunctions caused by neglecting these precautions.
z
Do not use
or store
the camera in the dusty or humid places.
z
Do not apply excessive force, vibration, or static electricity that could damage the camera. Handle the
camera with caution.
z
Do not shoot direct images that are extremely bright (e.g., light source, sun, etc.), and when camera is
not in use, please put the lens cap on. When extremely strong light source is shot, smear or blooming
may occur.
z
Follow the instructions in Chapter 6, “External Connector Pin Assignment” for connecting the camera
module. Improper connection may cause damages not only to the camera module but also to the
connected devices.
z
Confirm the mutual ground potential carefully before connecting the camera to other equipments.
AC leaks from the connected devices may cause damages or destroy the camera.
z
Do not apply excessive voltage. (Use only the specified voltage.) Unstable or improper power supply
voltage may cause damages or malfunction of the camera assembly.
z
Since VCC-HD3 is a highly-dense camera module, appropriate heat dissipation shall be considered.
We recommend using a metal base or others to install the camera.
