ENGLISH
22
HEARTH DOOR GLASS
The glass mounted in the hearth door is ceramic, and therefore resistant to high temperatures. To clean, use a
non abrasive dry cloth with specific liquid for glass cleaning.
Should it be damaged (e.g. chipped) it is recommended to have it replaced immediately by an authorised
technician before starting up the machine
DO NOT attempt to repair damaged glass: as there is a risk of explosion during functioning!
FLUE
To ensure that the machine works well, at least once a week, open, and when needed, clean the "T" at the
base of the fumes conduit and the horizontal portion of tube, if there is one.
The vertical fumes conduit and the entire flue must be checked and cleaned at least once a year. We
recommend the use of a specialised technician for a thorough and professional cleaning.
COMBUSTION AIR INTAKE
Monthly inspect the air intake tube positioned under the start-up resistors to ensure it is not blocked by any
foreign material. If required, remove or suck out the dirt.
GENERAL END OF SEASON CLEANING
Every two months empty the pellet tank and clean out all accumulated saw dust.
After use, at the end of the season, clean and check all the parts indicated above, remembering to disconnect
the power supply of the boiler for increased safety.
It is advisable to check and clean the machine at least once per year by an authorised technician to ensure
correct functioning.
It is recommended, when required, to check lubrication of the fuel loading auger bronze bearings.
