manualshive.com logo in svg

CS THERMOS Murano 15/18, Instructions Manual

Share
Download
CS THERMOS Murano 15/18 Instructions Manual Download Page 43

43

cod. 6118005   ed. 06-2021

9.4  OPERATION PHASES

DISPLAY MESSAGE

MEANING

Cleaning

Pre-ventilation phase and check of safety devices with crucible cleaning before fuel 

loading.

Loading

Switching-on phase with fuel loading into the burner and simultaneous power ON 

to resistors.

Pause

Flame wait pause

Flame wait

Waiting phase within which time ignition must take place

Flame stabil.

Stabilisation phase after flame ignition with fuel intermediate loading.

ON

Burner normal operation phase with power variation from 1 to 6.

Switching-off

Timed switching-off phase associated to fuel interruption with crucible cleaning 

and waiting for the flame to go off totally.

OFF

OFF state until heat is requested again.

Stand by

Switching-off due to the heating and water having reached the desired temperature.

In case of an alarm, it is necessary to wait for the end of the switching-off phase.

Summary of Contents for Murano 15/18





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands